Minutes, IBIS Quality Committee
December 16, 2003

TIME AND PHONE FOR NEXT MEETING
December 30, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-902-7868 or 866-902-7868
Meeting access: Meeting ID: 42477825

ROLL CALL
Adam Tambone
Barry Katz
Benjamin P Silva
*Bob Ross
Brian Arsenault
*Eckhard Lenski
Eric Brock
Gregory R Edlund
Hazem Hegazy
John Figueroa
John Angulo
Katja Koller
Kevin Fisher
*Kim Helliwell
Lance Wang
*Lynne Green
*Mike Labonte
Peter LaFlamme
*Robert Haller
Roy Leventhal
Sherif Hammad
Todd Westerhoff
Tom Dagostino
Kazuyoshi Shoji
Sadahiro Nonoyama

Everyone in attendance marked by  *

NOTE: "AR" = Action Required.

-----------------------MINUTES ---------------------------

- Review of minutes for November 18, 2003
     Minutes approved with following changed to
     DesignCon04 IBIS summit Monday Feb 2nd

- Announcements
     EIA Call for Patent Disclosure: No company declared a patent.

     Next IBIS Summit - Monday Feb 2nd (@ DesignCon04)

- AR Review

     AR Bob H. Replace ?? with "" in multiple places (DONE)
     AR Bob H. Add ECL models should be swept from -VDD to +2VDD  in
      section 4.X (DONE)
     AR Mike Labonte to create one line summarizes of each item. Followed
      by already agreed upon details. (DONE)

     Minutes and IQ_document.txt have been updated on the web site.

- Opens for new items

      No New Items

    Thanks to Mike Labonte for significant effort on the IQ_document.txt

- Detailed Documentation review

      Continued Review of entire IQ_DOCUMENT.TXT

Started with general overview of Mike's changes. Mike has enumerated all 
of the sections. Each section has an introduction designated .0 Each 
item begins with a section number, level, ibis keyword and short one 
liner, for example;

3.1.1 {LEVEL0} [Package] must have typical values

The one liners will be used to cross reference back into checkoff list.
Mike reviewed some editorial enhancements

      Reviewed feedback posted by Tom Dagostino.
Sections were reworded based on Toms feedback 4.1.13 and 4.3.11

AR Bob Haller to provide clarification wording to Mike on 4.3.11

Reviewed feedback posted by Kim Helliwell.

AR Kim to reword 1.2 to be consistent with 2.1 (IQ summary to be placed 
in notes section of IBIS file).

RemoveD stray parenthetical comments
Clarify OF wording in temperature range check.
Need to add details around Figure of Merit calculation

AR Bob Haller to cut and provide to Mike key pieces of IBIS accuracy 
Handbook.

Bob Ross suggested and team agreed that in general IV and VT data should 
be referred to as TABLES except when reference to viewing graphical 
data. When graphical data is implied then terminology of "curves" is 
acceptable. In some checks it makes sense to review both I-V tables and 
I-V curves.

AR Mike will add wording to section 4.3 to capture distinction between 
Tables and Curves.

Globally replace "curves" with "tables" and only leave in curves where 
appropriate. I/V will be global replaced with I-V. VT data will always 
be referred to as V-T tables to be consistent with the IBIS spec.

AR Mike will perform query replace.

AR Lynne to generate graphics for review to be included in non-text 
version of IQ document (HTML)

     Next meeting continue review of IQ_document.txt

Next meeting:
December 30, 2003
9-10 AM EST (6-7 AM PST)
Phone: 408-902-7868 or 866-902-7868
Meeting access: 42477825

Meeting ended at 10:00 AM Eastern Time.

